Mimaki UJF-3042 MkII e jig for 4.25 in ceramic tile blanks
With 0.5 mm clearance per side, 4 mm webs and a 10 mm margin, the Mimaki UJF-3042 MkII e's 300 × 420 mm work area fits 6 pockets for 4.25 in ceramic tile blanks, in 3 rows of 2. Staggering the rows does not help with this shape, so the grid is the best layout.
- Blanks per run
- 6
- Layout
- 3 rows of 2
- Blank
- 108 × 108 × 5.1 mm (4.25 × 4.25 × 0.2 in)
- 109 × 109 mm
- Clearance
- 0.5 mm per side
- Jig
- 3D-printed, 4.6 mm plate, 2.6 mm pockets
- Plate
- 300 × 420 mm, 10 mm margin, 4 mm webs
- Tallest point
- 7.1 mm (limit 153 mm)
- Solid volume
- 394 cm³, about 489 g of PLA at 100 % infill
Cut file in millimetres: red = cut, blue = engraved labels and marks. Adjust anything below and download the 3MF, STL, DXF and alignment template.
What to know before you cut
The 0.5 mm starting clearance assumes a any jig (natural material varies from piece to piece). Cut the test-fit coupon (0.0 to 0.5 mm) in the generator before the full plate: blanks from different suppliers vary, and printed holes usually come out slightly undersize.
As a 3D-printed plate 4.6 mm thick with 2.6 mm deep pockets, each 5.1 mm blank stands 2.5 mm proud of the jig and its top is 7.1 mm above the bed, within the 153 mm the Mimaki UJF-3042 MkII e accepts.
The full 300 × 420 mm plate is larger than a 256 mm 3D-printer bed. The 3MF from the generator splits it into 6 tiles along the webs between pockets, so no pocket is cut in half; glue them to a flat backing board and push it into the same corner of the bed each time.
Adjust this jig
The generator below starts from this machine and blank. Change the clearance, layout or jig build, then download the files.
6 pockets, 3 rows of 2, on a 300 mm × 420 mm plate.
- Pockets
- 6
- Plate
- 300 mm × 420 mm
- Cut path
- 4.05 m
- Solid volume
- 394 cm³ ≈ 489 g PLA
- Tallest point
- 7.1 mm of 153 mm
Volume is the solid model; your slicer's infill makes the real print lighter.
Cut it
Red = cut, blue = engrave. Millimetre units.
Print it
Plate with pocket recesses. Millimetres.
Line up the artwork
Template with pocket centres, blank edge, bleed and safe area, placed where the jig sits on the machine.
Other Mimaki UJF-3042 MkII e jigs
- iPhone 17 case: 6 per run
- Golf ball: 50 per run
Guides
- UV printer jig: how to make one that holds every blank
- Alignment templates for UV printing
- Jig clearance: how much gap per side
Sources
- Mimaki UJF-3042 MkII e specifications (work area, checked 2026-10-17)
- Sublimation ceramic tile 4.25 in (Heat Press Nation) (blank size)
Machine and product names are used only to describe compatibility. Pocketplate is not affiliated with Mimaki.
Get blank packs and Pro first
Everything here is free during the beta. Ready-made packs for common blanks and a Pro tier are next. Tell us which one you would pay for.